worktree-test/Software

WIND MESS ANLAGE BY NETWEBSYSTEMS®

BASIC INSTRUCTIONS FOR INSTALLATION FOR BEAGLEBONE

1. PREPARE BEAGLEBONE:

• 1.1 INSTALL O.S.
• 1.2 CONNECT THROUGH SSH (192.168.7.2)\
  • SSH password: Netweb4ever!
• 1.3 CONNECT TO WIFI
• 1.4 USE IFCONFIG TO CHECK IP AND USE THIS IP TO ACCESS REMOTELY
• 1.5 INSTALL 'minimalmodbus' and 'paho-mqtt' libraries WITH -H
  sudo -H pip3 install minimalmodbus paho-mqtt

2. PREPARE THE SENSOR:

• 2.1 OPEN THIES DEVICE UTILITY
• 2.2 LOG AS ADMIN KY04711, CS1
• 2.3 CHANGE DUPLEX MODUS AND WIRING
• 2.4 SET TIME ZONE (TZ26) AND DAILY TIME UPDATE(RT03)
• 2.5 CHANGE TO MODBUS RTU INTERPRETER IN THE THIES DEVICE UTILITY
• 2.6 CONNECT THE SENSOR TO THE BEAGLEBONE (BR & YE = A, GR & WH = B, GRAY = GND)

3. INSTALL THE SOFTWARE IN THE BEAGLEBONE

• 3.1 CLONE THE GIT REPOSITORY
  $ git clone http://git.strawhat-solutions.de/NetWEB/Windmessanlage.git
• 3.2 CREATE THE WORKING DIRECTORY AND COPY FILES:
• 3.3 EDIT THE CONFIG.INI FILE

4. SET SERVICE AUTO-START

• 4.1 COPY SERVICE FILE INTO BEAGLE BONE SERVICE DIRECTORY
  $ sudo cp /var/lib/cloud9/Windmessanlage/Software/Sensor/wma.service /lib/systemd/
• 4.2 CREATE A SYMLINK in the /etc/systemd/system/ directory
  $ sudo ln -s /lib/systemd/wma.service /etc/systemd/system/wma.service
• 4.3 RELOAD DAEMON, ENABLE AND START THE SERVICE

2. PREPARE DISPLAY:

• 1.1 POWER UP DISPLAY
  Connect the +24 and GND Wires to power up the Display
• 1.2 INSTALL 'pygame' and 'paho-mqtt' libraries WITH -H
• 1.3 CREATE CHANGE TO THE WORKING DIRECTORY
  $ sudo mkdir /home/pi/WMA/
  $ cd /home/pi/WMA/
• 2.2 CLONE THE GIT REPOSITORY
• 2.3 EDIT THE CONFIG.INI FILE FOR THE APPLICATION
  $ sudo nano /home/pi/WMA/Windmessanlage/Display/config.ini

3. SET SERVICE AUTO-START

• 3.1 COPY SERVICE FILE INTO BEAGLE BONE SERVICE DIRECTORY
  $ sudo cp /home/pi/WMA/Windmessanlage/Display/display.service /etc/systemd/system/display.service
• 3.2 RELOAD DAEMON, ENABLE AND START THE SERVICE\