48 lines
2.1 KiB
Markdown
48 lines
2.1 KiB
Markdown
|
#### WIND MESS ANLAGE BY NETWEBSYSTEMS®
|
||
|
|
##### BASIC INSTRUCTIONS FOR INSTALLATION FOR BEAGLEBONE
|
||
|
|
|
||
|
|
###### 1. PREPARE BEAGLEBONE:
|
||
|
|
* 1.1 INSTALL O.S.
|
||
|
|
* 1.2 CONNECT THROUGH SSH (192.168.7.2)\
|
||
|
|
- SSH password: Netweb4ever!
|
||
|
|
* 1.3 CONNECT TO WIFI
|
||
|
|
* 1.4 USE IFCONFIG TO CHECK IP AND USE THIS IP TO ACCESS REMOTELY
|
||
|
|
* 1.5 INSTALL 'minimalmodbus' and 'paho-mqtt' libraries WITH -H\
|
||
|
|
sudo -H pip3 install minimalmodbus paho-mqtt
|
||
|
|
###### 2. PREPARE THE SENSOR:
|
||
|
|
* 2.1 OPEN THIES DEVICE UTILITY
|
||
|
|
* 2.2 LOG AS ADMIN KY04711, CS1
|
||
|
|
* 2.3 CHANGE DUPLEX MODUS AND WIRING
|
||
|
|
* 2.4 SET TIME ZONE (TZ26) AND DAILY TIME UPDATE(RT03)
|
||
|
|
* 2.5 CHANGE TO MODBUS RTU INTERPRETER IN THE THIES DEVICE UTILITY
|
||
|
|
* 2.6 CONNECT THE SENSOR TO THE BEAGLEBONE (BR & YE = A, GR & WH = B, GRAY = GND)
|
||
|
|
###### 3. INSTALL THE SOFTWARE IN THE BEAGLEBONE
|
||
|
|
* 3.1 CLONE THE GIT REPOSITORY\
|
||
|
|
$ git clone http://git.strawhat-solutions.de/NetWEB/Windmessanlage.git
|
||
|
|
* 3.2 CREATE THE WORKING DIRECTORY AND COPY FILES:
|
||
|
|
* 3.3 EDIT THE CONFIG.INI FILE
|
||
|
|
|
||
|
|
###### 4. SET SERVICE AUTO-START
|
||
|
|
* 4.1 COPY SERVICE FILE INTO BEAGLE BONE SERVICE DIRECTORY\
|
||
|
|
$ sudo cp /var/lib/cloud9/Windmessanlage/Software/Sensor/wma.service /lib/systemd/
|
||
|
|
* 4.2 CREATE A SYMLINK in the /etc/systemd/system/ directory \
|
||
|
|
$ sudo ln -s /lib/systemd/wma.service /etc/systemd/system/wma.service
|
||
|
|
* 4.3 RELOAD DAEMON, ENABLE AND START THE SERVICE
|
||
|
|
|
||
|
|
###### 2. PREPARE DISPLAY:
|
||
|
|
|
||
|
|
* 1.1 POWER UP DISPLAY\
|
||
|
|
Connect the +24 and GND Wires to power up the Display
|
||
|
|
* 1.2 INSTALL 'pygame' and 'paho-mqtt' libraries WITH -H
|
||
|
|
* 1.3 CREATE CHANGE TO THE WORKING DIRECTORY\
|
||
|
|
$ sudo mkdir /home/pi/WMA/\
|
||
|
|
$ cd /home/pi/WMA/
|
||
|
|
* 2.2 CLONE THE GIT REPOSITORY
|
||
|
|
* 2.3 EDIT THE CONFIG.INI FILE FOR THE APPLICATION\
|
||
|
|
$ sudo nano /home/pi/WMA/Windmessanlage/Display/config.ini
|
||
|
|
|
||
|
|
###### 3. SET SERVICE AUTO-START
|
||
|
|
|
||
|
|
* 3.1 COPY SERVICE FILE INTO BEAGLE BONE SERVICE DIRECTORY\
|
||
|
|
$ sudo cp /home/pi/WMA/Windmessanlage/Display/display.service /etc/systemd/system/display.service
|
||
|
|
* 3.2 RELOAD DAEMON, ENABLE AND START THE SERVICE\
|